How to fix not connecting to a network on Snap-On APOLLO D8?
To fix this problem, first clear saved Wi-Fi networks. Then, connect to a network. Finally, from the Configure Wi-Fi screen, select the Wi-Fi Test icon and review the results.
Why are Repair Information Applications not available on my Snap-On Diagnostic Equipment?
There are several reasons why Repair Information Applications might not be available. Your access may have expired, in which case you should contact your sales representative. The function may be temporarily unavailable due to updates, so try again later. Also, ensure that the Wi-Fi radio is turned on: go to Tools > Settings > Configure Wi-Fi, select the Wi-Fi icon to turn the Wi-Fi radio on, and connect to a known good network.
What to do if my Snap-On APOLLO D8 Wi-Fi connection drops intermittently?
If your Wi-Fi connection drops intermittently, it could be due to insufficient Wi-Fi signal strength or a router overload. Check the Wi-Fi signal strength and move closer to the router (within 50 ft or 15 m) or into a direct, open sight-line of the router or access point. Eliminate interference from lights, windows, walls, other wireless devices, metal objects, and devices that emit electrostatic discharge. Alternatively, disconnect or disable other Wi-Fi devices connected to the router.
Explains conventions used in safety messages, including type styles and icons.
Defines signal words indicating hazard levels and their associated icons.
Details power sources (vehicle, battery, AC) and battery status indicators.
Procedures for powering the tool on, off, and performing an emergency shutdown.
Describes the function and operation of the tool's physical control buttons.
Instructions for connecting the data cable to OBD-II/EOBD compliant vehicles.
Instructions for connecting the data cable to OBD-I vehicles using adapters.
Procedure for starting and exiting the Scanner function.
Details the function of various control icons used in the scanner toolbar.
Steps for identifying a vehicle to establish communication and display data.
Procedures for viewing, saving, and managing diagnostic trouble codes.
How to view, save, and manage PID data from the vehicle.
Accessing and performing vehicle-specific functional tests.
Requirements and steps to access the Intelligent Diagnostics feature.
Accessing OEM oil specifications, fluid capacities, and service reset procedures.
Information on TPMS, tire fitment, and related service procedures.
Checking and clearing emissions-related DTCs and readiness monitors.
Performing OBD-II/EOBD tests, including starting communication and selecting services.
Setting up, testing, and troubleshooting Wi-Fi connections for network access.
General| Memory | 2 GB RAM |
|---|---|
| Display | 8-inch touchscreen |
| Operating System | Android |
| Connectivity | Wi-Fi, Bluetooth |
| Processor | Quad Core |
| Weight | 2.2 lbs (1 kg) |
| Supported Protocols | ISO 9141, ISO 14230 |
To Next Page
