Snap-On APOLLO D8 User Manual

94
Section 12 Maintenance
This section describes basic cleaning and battery replacement procedures for your
diagnostic tool.
Main Topic Links
• Cleaning and Inspecting the Diagnostic Tool page 94
• Battery Pack Service page 94
• Cleaning the Touch Screen page 94
• Safety page 94
• Ordering a New Battery Pack page 95
• Removing / Installing the Battery Pack page 95
• Disposing of the Battery Pack page 96
12.1 Cleaning and Inspecting the
Diagnostic Tool
Periodically perform the following tasks to keep your diagnostic tool in proper
working order:
• Check the housing, cables and connectors for dirt and damage before and after
each use.
• At the end of each work day, wipe the diagnostic tool housing, cables and
connectors clean with a damp cloth.
IMPORTANT
Do not use any abrasive cleansers or automotive chemicals on the
diagnostic tool.
12.1.1 Cleaning the Touch Screen
The touch screen can be cleaned with a soft cloth and a mild window cleaner.
IMPORTANT
Do not use any abrasive cleansers or automotive chemicals on the touch
screen.
12.2 Battery Pack Service
12.2.1 Safety
Follow all safety guidelines when handling the battery pack.
Risk of electric shock.
• Prior to recycling the battery pack, protect exposed terminals with heavy
insulating tape to prevent shorting.
• Disconnect all test leads and turn diagnostic tools off before removing the
battery pack.
• Do not attempt to disassemble the battery or remove any component
projecting from or protecting the battery terminals.
• Do not expose the diagnostic tool or battery pack to rain, snow, or wet
conditions.
• Do not short circuit the battery terminals.
Electric shock can cause injury.
WARN ING
WARN ING

Snap-On APOLLO D8 Specifications

General

Brand	Snap-On
Model	APOLLO D8
Category	Diagnostic Equipment
Language	English