Snap-On APOLLO D8 - Tire and Wheel Service

Quick Lookups Tire and Wheel Service
65
8.2 Tire and Wheel Service
Tire and Wheel Service is located in the Quick Lookups main menu (Quick
Lookups > Tire and Wheel Service).
Tire and Wheel Service is a integrated Information Service that provides up-to-date
information on your diagnostic tool. This feature allows you quick access to the
following information:
• Tire Pressure Monitoring System (TPMS) Indicator Reset Procedures
• TPMS Relearn Procedures
• Tire Pressure Sensor Removal/Installation Procedures
• Tire Fitment Specifications
Tire and Wheel Service can also provide (when available) quick access to the
following diagnostic functions when connected to a vehicle:
• View and Clear TPMS Related Codes
• View TPMS Related Data
• Perform TPMS Related Functional Tests
• View TPMS Troubleshooter Information
NOTES
— Tire and Wheel Service vehicle coverage is the same as the Scanner
vehicle coverage.
— Not all vehicles may have on-board diagnostic tool reset capabilities, or
have information available.
— To use the Tire and Wheel Service feature you must have authorized
access, contact your sales representative for details.
— The diagnostic tool is equipped with the ability to connect to a Wi-Fi
network, however the connection is solely dedicated to our Snap-on Web
Services Network. Before you begin using an integrated Information Service
you must connect to a wireless network. See Configure Wi-Fi - Setup, Testing
and Troubleshooting on page 88 for instructions.
— If you experience a wireless network connection loss, Tire and Wheel
Service information will not refresh and/or may cause the function to stop. To
continue use, you must re-establish your Internet connection.
— Performance may vary depending on your wireless network equipment and
ISP.
8.2.1 Operation
NOTE
The information and procedures provided by the Tire and Wheel Service
function is vehicle specific, therefore a vehicle must be identified before
information can be displayed.
Using the Tire and Wheel Service function
There are two methods to access this function:
• From the Home screen - select the Quick Lookups icon (Figure 8-10), then
select Tire and Wheel Service, then proceed to Step 1.
• From within a current Scanner session - select Tire and Wheel Service (or
applicable choice) from the System menu (Figure 8-11), follow the screen
prompts to identify the vehicle, and then proceed to Step 4.
Figure 8-10 Home Screen - Quick Lookups Icon
Scanner
Previous Vehicle
and Data
Quick Lookups
OBD-II/EOBD
Tools