How to fix not connecting to a network on Snap-On APOLLO D8?
To fix this problem, first clear saved Wi-Fi networks. Then, connect to a network. Finally, from the Configure Wi-Fi screen, select the Wi-Fi Test icon and review the results.
Why are Repair Information Applications not available on my Snap-On Diagnostic Equipment?
There are several reasons why Repair Information Applications might not be available. Your access may have expired, in which case you should contact your sales representative. The function may be temporarily unavailable due to updates, so try again later. Also, ensure that the Wi-Fi radio is turned on: go to Tools > Settings > Configure Wi-Fi, select the Wi-Fi icon to turn the Wi-Fi radio on, and connect to a known good network.
General| Memory | 2 GB RAM |
|---|---|
| Display | 8-inch touchscreen |
| Operating System | Android |
| Connectivity | Wi-Fi, Bluetooth |
| Processor | Quad Core |
| Weight | 2.2 lbs (1 kg) |
| Supported Protocols | ISO 9141, ISO 14230 |
To Next Page
