Snap-On CT9075 - Page 90

90
ZCT9075CE Rev. E (11/19)
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Snap-on Tools Company
2801 80th Street
Kenosha, WI 53141-1410, U.S.A.
Object of declaration:
Product: Cordless Impact Wrench
Model No:
CTEU9075 CTEU9075B CTEU9075DE CTEU9075G CTEU9075R CTEU9075O
CTEU9075PK CTEU9075PR CTEU9075Y CTEU9075L CTEU9075P
CTEU9100 CTEU9100B CTEU9100DE CTEU9100G CTEU9100R CTEU9100O
CTEU9100PK CTEU9100PR CTEU9100Y CTEU9100L
Serial Number: 1822XXXX-->XXXXXXXX
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Machinery Directive: 2006/42/EC
Electromagnetic Compatibility Directive: 2014/30/EU
References to the relevant harmonised standards used or references to the specifications in relation to which
conformity is declared: Safety: EN 60745
Object of declaration:
Product: Battery Charger Series
Model No: CTCEU720/CTCEU131
Serial Number: 1718XXXX-->XXXXXXXX
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Low Voltage Directive: 2014/35/EU
Electromagnetic Compatibility Directive: 2014/30/EU
References to the relevant harmonised standards used or references to the specifications in relation to which
conformity is declared:
Safety: IEC 60335-1:2010+A1:2013 /
Safety: IEC 60335-2-29:2002+A1:2004+A2:2009
Safety: EN 60335-1:2012+A11:2014
Safety: EN 60335-2-29:2004+A2:2010
EMF: EN 62233:2008
EMC: EN 55014-1:2006+A1:2009+A2:2011
CISPR 14-1:2005+A1:2008+A1:2011
AZ/NZS CISPR 14.1:2013
EMC: EN 61000-3-2:2014, CLASS B
EMC: EN 61000-3-3:2013
EMC: EN 55014-2:2015 (CATEGORY II)
EMC: IEC 61000-4-2:2008 ED 2.0
EMC: IEC 61000-4-3:2010 ED 3.2
EMC: IEC 61000-4-4:2012 ED 3.0
EMC: IEC 61000-4-5:2014 ED 3.0
EMC: IEC 61000-4-6:2013 ED 4.0
EMC: IEC 61000-4-11:2004 ED 2.0
The authorized representative located within the
European Union (EU) is:
Francesco Frezza
Snap-on Equipment
Via Prov. Carpi, 33
42015 Correggio RE
Italy
The authorized representative located within the United
Kingdom (UK) is:
Matthew Law
Snap-on Tools Ltd
Telford Way Industrial Estate
Kettering, Northants
NN16 8SN
United Kingdom
Signed for and on behalf of the above named manufacturer:
Place and date of issue:
Kenosha WI 53141-1410, USA
10/2018
Name, function: Charles R Frontczak
Cordless Power Tools Engineering Manager
Signature:
www.snapon.com