Snap-On CTC772A Series User Manual

4
ZCTC772ACE Rev. C (11/19)
Risk of burn.
• Do not attempt to disassemble the battery or remove
any component projecting from the battery terminals.
• Prior to recycling, protect exposed terminals with
heavy insulating tape to prevent shorting.
Fire can cause injury.
SAVE THESE
INSTRUCTIONS
Functional
Description
Figure 1: Battery Charger
Specifications
The equipment described in these specifications has
been tested in accordance with applicable Underwriters
Laboratories standards.
Battery Charger
Specifications
Input
CTC772A/CTCA772A/CTCEU772A/CTCJ772A .......
..........................................100-240VAC, 50/60Hz
Output
All Models ..................................................... 3.0A
Weight
All Models ................................. ~1.15 lb (0.52 kg)
Charging Temperature Range
CTB8172BK/ CTB8174 ..........................................
...................................32°F (0°C) to 113°F (45°C)
Symbology
SYMBOLOGY
REFER TO INSTRUCTION
MANUAL/BOOKLET
WEAR EYE PROTECTION
VIBRATION HAZARD
VOLTS
DIRECT CURRENT
n
0
xxx/min NO LOAD RPM
CE MARK
CANADIAN - UNITED STATES
UNDERWRITERS LABORATORY
FCC
FEDERAL COMMUNICATIONS
COMMISSION
JAPAN ELECTRICAL SAFETY
TÜV RHEINLAND
DOUBLE INSULATION

Snap-On CTC772A Series Specifications

General

Brand	Snap-On
Model	CTC772A Series
Category	Battery Charger
Language	English