Snap-On CTR714A - EU Declaration of Conformity; Cordless Ratchet Conformity; Battery Charger Conformity

78
ZCTR714ACE Rev. E (08/19)
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Snap-on Tools Company
2801 80th Street
Kenosha, WI 53141-1410, U.S.A.
Object of declaration:
Product: Cordless Ratchet
Model No:
CTREU714A CTRQEU714 CTREU717 CTRQEU717
CTREU714AG CTRQEU714G CTREU717G CTRQEU717G
CTREU714AO CTRQEU714O CTREU717O CTRQEU717O
CTREU714AP CTRQEU714P CTREU717P CTRQEU717P
CTREU714ABK CTRQEU714BK CTREU717BK CTRQEU717BK
CTREU714AHV CTRQEU714HV CTREU717HV CTRQEU717HV
CTREU714AGM CTRQEU714GM CTREU717GM CTRQEU717GM
Serial Number: 1724XXXXX-->XXXXXXXX / 1819XXXXX-->XXXXXXXX
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation;
Machinery Directive: 2006/42/EC
Electromagnetic Compatibility Directive: 2014/30/EU
References to the relevant harmonised standards used or references to the specifications in relation to which
conformity is declared:
Safety: EN60745-1:2009+A11:2010
Object of declaration:
Product: Battery Charger Series
Model No: CTCEU772A
Serial Number: 1727XXXX-->XXXXXXXX
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Low Voltage Directive: 2014/35/EU
Electromagnetic Compatibility Directive: 2014/30/EU
References to the relevant harmonised standards used or references to the specifications in relation to which
conformity is declared:
Safety: IEC 60335-1:2010+A1:2013
Safety: IEC 60335-2-29:2002+A1:2004+A2:2009
Safety: EN 60335-1:2012+A11:2014
Safety: EN 60335-2-29:2004+A2:2010
EMF: EN 62233:2008
EMC: EN 55014-1:2006+A1:2009
EMC: EN 55014-2:1997+A1:2001+A2:2008
EMC: EN 61000-3-2:2006+A1:2009+A2:2009
EMC: EN 61000-3-3:2008
The authorized representative located within the community is:
Robert Barnett
Snap-on Tools Ltd
Telford Way Industrial Estate
Kettering, Northants
NN16 8SN
United Kingdom
Signed for and on behalf of the above named manufacturer:
Place and date of issue: Kenosha WI 53141-1410, USA
10-2018
Name, function: Charles R Frontczak
Cordless Power Tools Engineering Manager
Signature: www.snapon.com