Snap-On POLARTEK EEAC330 User Manual

• 25 •
Then the following screen will be displayed:
Disconnect HP coupling. Start A/C system with LP coupling
connected, press ENTER.
The A/C system will recover the refrigerant into the service hoses,
then the following screen will be displayed:
Disconnect LP coupling from A/C system, then press ENTER to
continue:
The machine will recover the residual refrigerant into the service
hoses, then the following screen will be displayed:
Close HP and LP side valves then press ENTER to continue:
Procedure is now successfully completed.
Press ENTER to exit.
R134a MANUAL PROCEDURE
EMPTY HOSES
Close HP and LP side valves and press ENTER
R134a MANUAL PROCEDURE
CHARGE
Disconnect LP coupling from A/C system and press ENTER
R134a MANUAL PROCEDURE
xx psi
EMPTY HOSES
Empty hoses
Hoses pressure
R134a MANUAL PROCEDURE
EMPTY HOSES
End Of Procedure
PAG injected xxx oz
Gas charged xxx lb
Press ENTER to continue
Disconnect HP coupling Start A/C system with LP
coupling connected and press ENTER
R134a MANUAL PROCEDURE
CHARGE

Snap-On POLARTEK EEAC330 Specifications

General

Brand	Snap-On
Model	POLARTEK EEAC330
Category	Test Equipment
Language	English