Snap-On POLARTEK EEAC330 User Manual

• 27 •
Disconnect HP coupling. Start A/C system with LP coupling
connected, press ENTER.
The A/C system will recover the refrigerant into the service hoses,
then the following screen will be displayed:
Disconnect LP coupling from A/C system, then press ENTER to
continue:
The machine will recover the residual refrigerant into the service
hoses, then the following screen will be displayed:
Close HP and LP side valves then press ENTER to continue:
Procedure is now successfully completed.
Press ENTER to exit.
MAINTENANCE
From the MAIN MENU:
Select the MAINTENANCE, the following screen will be displayed:
R134a MANUAL PROCEDURE
EMPTY HOSES
Close HP and LP side valves and press ENTER
R134a MANUAL PROCEDURE
CHARGE
Disconnect LP coupling from A/C system and press ENTER
R134a MANUAL PROCEDURE
xx psi
EMPTY HOSES
Empty hoses
Hoses pressure
CALIBRATION
CHANGE DRYER FILTER
DATABASE
EMPTY HOSES
MAINTENANCE REPORT
AIR PURGE MANUAL
R134a MAINTENANCE
A/C PRESSURE CHECK
R134a
mm/dd/yyyy
hh:mm
xxxxxxx
AUTOMATIC MANUAL
SETUP MAINTENANCE
R134a MANUAL PROCEDURE
EMPTY HOSES
End Of Procedure
Gas charged xxx lb
Press ENTER to continue

Snap-On POLARTEK EEAC330 Specifications

General

Brand	Snap-On
Model	POLARTEK EEAC330
Category	Test Equipment
Language	English