104
Trouble shooting
* = Factory adjusted mode
Code C0
Setting the factory-adjusted
modes of operation
(F 5.)
0* = No action
1 = Set default values
(state 1 is only shown briefl y)
The selected mode of operation can be transferred to
the permanent memory.
Code C1
Selecting the resolution of unbalance readings in
1 or 5 g (= from 0.05 or 0.25 oz.) increments
0* = 5 g (0.25 oz) increments
1 = 1 g (0.05 oz) increments
The selected mode of operation can be transferred to
the permanent memory.
Code C2
Selecting suppression of minor unbalance
readings
0* = Suppression off
1 = Suppression on
The selected mode of operation can be transferred to
the permanent memory.
To Next Page
Loading...
