Need help?Do you have a question about the Snap-On EEWB332B and is the answer not in the manual?
General| Brand | Snap-On |
|---|---|
| Model | EEWB332B |
| Category | Wheel Balancers |
| Language | English |
Important information concerning safety and maintenance.
Intended use and range for car and light truck wheels.
Technical details and capabilities of the wheel balancer.
Key operational and design features of the balancer.
List of included accessories for the wheel balancer.
List of optional accessories available for purchase.
Machine dimensions and required safe installation area.
Guidelines for safely removing and positioning the balancer.
Electrical wiring must be performed by licensed personnel.
Instructions for assembling the monitor tower.
Steps for installing the protective wheel guard.
Describes the components and functions of the input panel.
Steps to inspect the wheel/tire assembly before balancing.
Procedure for mounting standard wheels using cones.
Mounting procedure for light truck wheels using optional spacers.
Procedures for mounting clad wheels or those needing special tooling.
How to select different balancing modes and weight placement options.
Setting fine balancing mode, unit conversions.
Procedures for entering rim distance, diameter, and width.
Manual input of rim diameter and distance.
Automatic rim dimension and Alu mode selection.
How the laser indicator guides weight placement.
Detailed steps for applying weights using the laser pointer.
Procedure for balancing spoke wheels using the split weight mode.
Function to store or recall rim data (wheel type, diameter, etc.).
Toggles weight units between ounces and grams.
Toggles dimension units between inches and millimeters.
Alerts for improper wheel clamping; can be disabled.
Procedure for automatic optimization of balance.
Procedure for minimizing weight usage.
Explains error (E) and warning (H) codes.
Codes for changing operating modes and settings.
To Next Page
