What to do if Snap-On EEWB304B Wheel Balancers gives random readouts?
If your Snap-On Wheel Balancers machine is giving random readouts, this indicates a defect in the electric/electronic system. Call the Equiserv service center for assistance.
How to troubleshoot displays not lighting up on Snap-On EEWB304B?
If the displays do not light when turning on your Snap-On Wheel Balancers machine, it is likely due to no electric power. Check the input voltage.
What to do if my Snap-On Wheel Balancers machine does not stop after balancing cycle?
If your Snap-On Wheel Balancers machine does not stop after the balancing cycle, it might be unstable on the floor. Ensure that the machine is stable.
Why does one parameter cease to properly measure rim parameters causing machine lockup in Snap-On EEWB304B?
If one of the parameters ceases to properly measure rim parameters causing machine lockup on your Snap-On Wheel Balancers, it could be due to a malfunction of the Parameter arm from either a failure of the electrical system or harness connection failure. You can replace the Parameter arm or manually enter the parameters to continue operation.
Why is Snap-On EEWB304B Wheel Balancers slow to display when powering machine up?
The Snap-On Wheel Balancers machine performs a self-test routine on start-up, so a delay of several seconds before the display is activated is normal.
General| Brand | Snap-On |
|---|---|
| Model | EEWB304B |
| Category | Wheel Balancers |
| Language | English |
Provides important safety and maintenance information for the balancer product.
Details the precision of weight placement and imbalance measurement capabilities.
Pre-balancing checks for wheel and tire condition, air pressure, and foreign materials.
Procedures for properly mounting wheels onto the balancer shaft, ensuring correct centering.
Automatic measurement and entry of wheel distance and diameter using the gauge arm.
Guidance on applying corrective weights at the specified inner and outer plane positions.
To Next Page
