72
5-36
5-37
Operation
Fig. 5-36 MINIMISATION “Un.4”
(First measuring run of tyre/rim assembly)
— Readjust the wheel such that the valve is exactly
perpendicular to and above the main shaft.
— Enter the valve position by pressing menu key
F1.
The MINIMISATION “Un.5” screen (Fig. 5-37) is
displayed.
Fig. 5-37 MINIMISATION “Un.5”
START is signalled on the screen.
— Press the START key.
A measuring run is performed.
— Next proceed as for optimisation, starting at the
screen as shown in
Paragraph 5.10.5.
To Next Page
Loading...
