Snap-On TECHANGLE ATECH3FR300B User Manual

14
Setting LCD Contrast
This function will allow user to set LCD contrast for optimal viewing.
1. From Settings menu, use UP   /DOWN   buttons to highlight LCD CONTRAST selection then press
ENTER   button.
2. CONTRAST screen is displayed.
3. Use UP   /DOWN   buttons while viewing display to change contrast to desired level.
Selectable levels: 20 to 80 in increments of 5 (factory default = 40).
4. Press ENTER   button to accept selection and exit to Settings menu.
Key Beep Setup
This function will allow user to enable or disable audio feedback when a button is pressed.
1. From Settings menu, use UP   /DOWN  buttons to highlight KEY BEEP selection then press
ENTER   button.
2. KEY BEEP screen is displayed.
3. Use UP   /DOWN  buttons to highlight ENABLE (factory default) or DISABLE selection.
4. Press ENTER   button to accept selection and exit to Settings menu.
Auto Backlight Setup
This function will allow user to enable or disable backlight from turning on during torque or angle
measurement.
1. From Settings menu, use UP   /DOWN  buttons to highlight AUTO BACKLIGHT selection then
press ENTER   button.
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
UP/DOWN
buttons
ENTER
button
KEY BEEP
ENABLE
DISABLE
SHOW INFO
SLEEP TIME
LCD CONTRAST
KEY BEEP
ENTER
button
UP/DOWN buttons
KEY BEEP
ENABLE
DISABLE
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
UP/DOWN buttons
ENTER
button
CONTRAST: 20
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
ENTER
button
UP/DOWN buttons
CONTRAST: 80

Snap-On TECHANGLE ATECH3FR300B Specifications

General

Brand	Snap-On
Model	TECHANGLE ATECH3FR300B
Category	Power Tool
Language	English