Snapkis Transformers 0-4 - Car Seat Parts; How to Ensure Shoulder Belts Are at Correct Height; How to Adjust the Shoulder Belts

5
6
4. Car Seat Parts 5. How to ensure the shoulder belts are at the
correct height
Backrest
5-point
harness
system
Belt route slot for
Group I
Belt route slot for
Group 0+
Reclining
adjustment lever
Harness adjuster strap
Quick adjuster button
Buckle pad
Inner cushion
Shoulder pad
Headrest
Blue belt hook
Red Lock-o
Belt route slot
for Group I
Belt route slot for
Group 0+
Shoulder belt
route slot
Shoulder belt
Yoke connect plate
Manual storage
Car seat base
For your child’s safety, always check
that the height of the shoulder belts
are adjusted according to the
size/height of your child. The
shoulder belt should be at the same
level as your child’s shoulder or
slightly higher(as shown in the
diagram).
6. How to adjust the shoulder belts
Step 1: From the back of the
car seat, remove both
shoulder belts from the
yoke connect plate.
Step 2: Pull both
shoulder belts out
from the shoulder
belt route slot.
Step 3: Insert the
shoulder belts into
the appropriate
shoulder belt route
slot.
Step 4: Fit the shoulder belts into
the yoke connect plate.
Important: Make sure both
shoulder belts are of the same
height, not twisted, and fitted
properly into the yoke connect
plate.
If the height of the shoulder belt is not suitable for your child, adjust it according
to the following steps:
A
B
C