1 2 3 4
7. How to fasten the harness buckle
click
Step 1
Step 2
Step 3
87
8. How to adjust and secure the harness
9. How to adjust the reclining position of the
car seat
Loosening the harness
Press the quick adjuster button and pull the
shoulder belts towards yourself to loosen the
harness.
Tightening the harness
Place your child in the car seat. Insert the joined
buckles tongues into the harness buckle. Adjust the
position of the lap and shoulder belts. Pull the
harness adjuster strap until the harness is tight.
Tighten the
harness
Follow the method shown in the diagrams above:
Step 1: Put the right and left tongues of the buckle together. Ensure the buckle
tongues are firmly together.
Step 2: Insert the joined buckles tongues into the harness buckle until you hear a
“click” sound. Make sure the harness buckle is secure by pulling the shoulder belt
upwards.
Step 3: To release the harness, press the red button on the harness buckle. The red
button passed the safety test and meets the safety standard. It is dicult for a
child to unfasten the harness buckle on his own.
This car seat can be adjusted to four reclining positions. For Group 0+, adjust the
car seat to level 4. For Group I, adjust the car seat to level 1, 2 or 3.
Pull the reclining adjustment lever and adjust the car seat to the most suitable
position. Release the reclining adjustment lever and you should hear a “click”
sound.
click
Before
(Level 1)
After
(Level 4)
!
Important: Tighten the harness as far as
possible, while ensuring your child is
comfortable.
To Next Page
Loading...