snapnrack.com
15
Wire Management
INSTALLATION INSTRUCTIONS - SMART CLIPS
SmartClip and SmartClip XL should be used to route conductors in a neat and workmanlike
manner away from all non-bonded components and support the conductors adequately to
eliminate potential damage.
1) Use SnapNrack Smart Clip II to
manage up two PV wires inside the
module frame while prepping out the
modules on the ground or installing
modules on the roof.
2) Use SnapNrack Smart Clip XL to
manage larger bundles of PV wire; up
to 6 PV wires per clip
To Next Page
Loading...