Snapper 1694955 User Manual

1
38” & 42” Mulch Kit
Mfg. Nos. 1694955 & 1694956
For LT-200 Series Lawn Tractor
Figure 1. Contents
Kit Contents:
Ref. Part No. Qty. Description
1 721387A 1 COVER, Mulch
2 720125 1 NUT, Wing, 5/16-18
3 1931333 2 CARRIAGE BOLTS, 5/16-18 x 3/4
4 1732373 2 BLADES, for 38” Mower Deck
4 1732374 2 BLADES, for 42” Mower Deck
5 1933988 2 NUT, Push, 5/16
6 1733098 1 KNOB, Plastic, 5/16-18
INSTALLATION
1. Remove mower deck (see “Mower Deck Removal
and Installation” in the Operator’s Manual).
2. See Figure 2. Remove the old blades. Use a block
of wood to prevent blade rotation. Loosen the nut by
turning it counterclockwise.
3. Remove the spring washers (B, Figure 3), blade nut
(C), and blade.
Before beginning any service work turn off the
PTO, set the parking brake, turn off the ignition,
remove the key, and disconnect the spark plug
wire(s). Mower blades have sharp edges. Avoid
contact with edges. Wear gloves while handling.
WARNING
1
5
3
LOOSEN
Figure 2. Blade Removal
70-80 ft. lbs.
95-108 N.m.
Figure 3. Blade Installation
A. 4x4 Wood Block
B. Spring Washers
C. Blade Nut
D. Wings
A
B
C
D
4
Installation
Instructions
2
6

Snapper 1694955 Specifications

General

Brand	Snapper
Model	1694955
Category	Lawn Mower Accessories
Language	English