Snapper 1696001 - Auger Drive Group

Not for
Reproduction
Footnotes:
Manual No.
710528527" & 29" TWO STAGE
2011
11
Auger Drive Group
Part No Descri
p
tionItem Qty
0070 1753073 1 GEAR CASE ASSEMBLY, 27" (Used on 27" Models)
0070 1752295 1 GEAR CASE ASSEMBLY, 29" (Used on 29" Models)
0080 722726 1 KEY, Square, 3/16 x 3/4
0090 1739094A 1 IMPELLER
0100 1739073 1 HUB, Impeller
0110 1930601 3 SCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8
0130 7090848 3 SET SCREW, Socket Head, 5/16-18 x 1/2 (Used on 27" Models)
0130 1930540 3 SET SCREW, Square Head, 5/16-18 x 5/8 (Used on 29" Models)
0150 722128 1 PULLEY
0160 726061 2 CAPSCREW, Hex Head, 1/4-20 x 1-3/4, G2
0170 725429 2 NUT, Hex Center Lock, 1/4-20
0190 723913 2 SPACER, 1/4 x 1/2
0220 1740736A 1 AUGER, LH, 27" (Used on 27" Models)
0220 1740738A 1 AUGER, LH, 29" (Used on 29" Models)
0230 1740737A 1 AUGER, RH, 27" (Used on 27" Models)
0230 1740739A 1 AUGER, RH, 29" (Used on 29" Models)
0220-40 721620 1 FITTING, Grease (Included with Ref. Nos. 0220 & 0230)
-- 722130 1 KIT, Shear Bolt (Includes Ref. Nos. 0160 & 0170)