Snapper 3 Series User Manual

Safety Instructions & Operator's Manual for
INTERMEDIATE
REAR TINE TILLER
SERIES 3
MODEL
IR5003B
NIR5OO3B
MODEL NUMBER EXPLANATION
I I I I
MODEL DESIGNATION
REAR TINE MODEL
ENGINE MODEL
SERIES DESIGNATION
ENGINE HP
I-Intermediate Size Model I 50 -5 HP Engine (Horse Power) I 3-Series Designation
R - Rear Tine Type Model I I
B - Briggs Engine
Thank you for buying a SNAPPER product! Your Tiller was designed and built to provide long and satisfactory service.
Study this manual carefully before operating the Tiller and pay particular attention to the Important Safety Instructions
found herein. Keep in mind that a Tiller, like any other mechanical device, can be potentially dangerous if used
improperly. Following the instructions in this and the engine manual will help you continue to enjoy the trouble-free
operation expected of a SNAPPER.
SNAPPER, McDonough,GA., 30253 U.S.A.
COPYRIGHT © 1999
SNAPPER INC.
ALL RIGHTS RESERVED
MANUAL No. 2-8701 (REV. 2, 5/18/99)

Snapper 3 Series Specifications

General

Brand	Snapper
Model	3 Series
Category	Snow Blower
Language	English

Summary

Important Safety Instructions

Protection for Children

Guidelines for keeping children safe around the tiller during operation.

Preparation

Steps to take before operating the tiller, ensuring safety and readiness.

Operational Precautions

Safety measures and warnings to follow during tiller operation.

Maintenance and Storage

Procedures for maintaining the tiller and safe storage practices.

Section 1 - Familiarization

Introduction and Component Overview

Overview of the tiller model and identification of key components and controls.

Section 2 - Operating Instructions

Before Operating and Transmission Positions

Familiarization with controls, transmission settings, and pre-operation checks.

Pre-Start Checklist

Essential checks to perform before starting the tiller engine for operation.

Starting and Stopping

Procedures for safely starting and stopping the tiller's engine and drive system.

Engine Starting Procedure

Step-by-step guide for starting the tiller's engine, including choke and throttle usage.

Handlebar Adjustment

Instructions on how to adjust the tiller's handlebar for comfortable operation.

Transporting

Methods for safely transporting the tiller to different locations.

Tilling Procedure

How to operate the tiller effectively for tilling, including depth and speed settings.

Section 3 - Adjustments & Repair

Service Parts & Assistance

Information on obtaining genuine replacement parts and dealer assistance.

Standing the Tiller on End

Safety warnings and procedures for placing the tiller in an upright position.

Tiller Lubrication

Guidance on lubricating the tiller's chain case and other components.

Tiller Tines

Instructions for inspecting, replacing, and torquing tiller tines.

Belt Adjustment & Replacement

Procedures for adjusting belt tension and replacing the drive belt.

Off Season Storage

Steps for preparing the tiller for long-term storage to prevent damage.

Warranty

3 Year Limited Warranty

Details of the manufacturer's limited warranty coverage for the tiller.

Disclaimer of Warranty

Limitations and exclusions of warranty coverage and liabilities.

Primary Maintenance

Snapper vs. Dirt! Overview

Introduction to the importance of maintenance, focusing on dirt as an engine enemy.

Air Cleaner Maintenance Importance

Explanation of air cleaner function, dirt impact, and consequences of poor service.

Filter Cleaning, Fuel, and Oil Checks

Procedures for cleaning air filters, checking fuel quality, and verifying oil levels.

Starting Check List and Lubrication

Comprehensive checklist for starting and notes on engine lubrication for 2-cycle and 4-cycle engines.