Need help?Do you have a question about the Snapper L1226E and is the answer not in the manual?
General| Type | Two-stage |
|---|---|
| Engine Displacement | 250cc |
| Number of Forward Speeds | 6 |
| Number of Reverse Speeds | 2 |
| Chute Control | Manual |
| Drive System | Friction Disc |
| Engine | Briggs & Stratton |
| Clearing Width | 26 inches |
| Throwing Distance | 40 ft |
| Start Type | Recoil |
| Intake Height | 20 inches |
| Starter Type | Recoil |
| Stages | Two-stage |
General safety guidelines for operating the snowthrower safely.
Emphasizes the importance of reading and understanding the operator's manual for safe use.
Crucial safety precautions to keep children away from the operating area.
Warnings about dangers from moving parts and safety interlock systems.
Safety advice regarding debris ejected from the snowthrower's discharge chute.
Guidelines for safe fuel handling and the importance of regular maintenance for safety.
Instructions on proper familiarization and operation of the unit for the operator.
Steps to take before starting operation, including fuel and safety checks.
Essential safe operating practices and precautions for using the snowthrower.
Procedures for safely clearing a clogged discharge chute without injury.
Guidelines for maintaining and storing the snowthrower properly for longevity.
Information about engine emissions and potential health effects.
Compliance statement for the spark ignition system with Canadian standards.
Displays various safety warning and instructional decals applied to the unit for user reference.
Instructions for recording model and serial numbers for efficient service and parts ordering.
Step-by-step guide to unpack the snowthrower from its shipping container.
Instructions for raising handles and verifying control cable connections and routing.
Procedure for correctly installing the chute rotator control handle.
Steps to connect the shift rod to the engine's shift lever.
Instructions for assembling the chute and rotator components to the main unit.
Procedure for assembling the split rod mechanism for chute control.
Steps to connect the spout rotator brake cable for secure positioning.
Instructions for safely removing the snowthrower from its shipping crate.
Final cable securing and general checks before initial operation.
Procedures for checking engine oil level and adding fuel before starting.
Identifies and describes the location of various controls on the snowthrower.
Explains the function of major controls like speed selector, traction, auger, and starter.
Essential pre-operation checks to ensure safe and correct functioning.
Detailed steps for checking and adding engine oil to the correct level.
Instructions for safely fueling the snowthrower with appropriate gasoline.
Procedures for starting the engine, covering both cold and warm starts.
Step-by-step guide to operating the snowthrower's primary functions.
How to use the speed selector for varying snow conditions and speeds.
How to adjust the discharge chute deflector for desired snow throw distance.
How to adjust the scraper bar height using the skid shoes.
Explains how to use Easy Turn™ and traction drive lock for maneuverability.
Recommended steps to perform after each snowthrower operation to prevent issues.
Guidelines for safely storing the snowthrower for the off-season.
A table outlining required maintenance tasks and their recommended frequencies.
Procedure for checking and maintaining correct tire pressure for optimal performance.
Steps for lubricating the auger gear case with the specified grease.
Details on lubricating various moving parts, axles, and controls of the snowthrower.
How to check and lubricate the Free-Hand control linkage for proper disengagement.
Procedures for lubricating the auger shaft assembly, including shear pin replacement.
A guide to identifying and resolving common issues with the snowthrower.
Instructions for adjusting the auger drive cable tension for proper engagement.
Steps for adjusting the traction drive cable for correct engagement and disengagement.
Procedure for measuring and adjusting the friction disc for proper drive function.
How to adjust the Easy Turn™ control cable if gears do not disengage properly.
Instructions for adjusting the auger drive belt tension for optimal snow discharge.
Guide to replacing shear pins that protect the gearbox from damage during impact.
How to adjust the belt guide for proper alignment of the auger drive belt.
Detailed steps for replacing the auger drive belt when damaged or worn.
Instructions for replacing the traction drive belt if it is worn or damaged.
Details engine make, model, torque, displacement, and oil capacity.
Details chassis dimensions, wheel size, tire pressure, and drive system components.
Information on obtaining genuine Snapper replacement parts from an authorized dealer.
Information on how to obtain additional technical manuals and illustrated parts lists.
List of convenient service and maintenance items available from the dealer.
To Next Page
