To Next PageTo Next Page
Need help?Do you have a question about the Snapper 4220 Series and is the answer not in the manual?
General| Throwing Distance | 30 feet |
|---|---|
| Stages | Single-stage |
| Engine Type | 4-cycle |
| Starter Type | Recoil |
| Auger Material | Steel |
| Chute Control | Manual |
| Warranty | 2-year limited |
Guidelines for keeping children safe during operation and supervision.
Steps to take before operating the snow thrower, including area checks and safety gear.
Key safety measures to follow while the snow thrower is in use.
Breakdown of how Snapper model numbers are structured.
Identification and explanation of all operational controls and features.
Essential checks and adjustments before starting the snow thrower.
Detailed explanation of how to use the various controls during operation.
Procedures for starting the engine and allowing it to warm up properly.
General guidance on lubricating the snow thrower components.
Specific instructions for lubricating the auger shafts annually.
Annual lubrication requirements for the auger shaft bearings.
Annual lubrication requirements for the gearbox.
How to adjust the chute crank mechanism if it becomes stiff.
Guidance on checking and servicing drive belts for performance.
How to adjust belt tension using the idler pulley system.
Steps for adjusting clutch cables for proper engagement and disengagement.
Adjusting skid shoes for different surface types and clearance.
Where to find parts, service, and additional manuals.
