Snapper 18 Series Operator's Manual

SERVICE SCHEDULE
ITEM
Engine Oil
SERVICE PERFORMED REF.
Check Oil Level Page 7
EACH 5 25
USE HRS HRS
X
5O
HRS
100
HRS
Initial Oil Change Page 12
X
Periodic Oil Change Page 13
X*
Air Pre-Cleaner Clean Sponge Element Engine Manual
X**
Air Cleaner Clean or Replace Engine Manual
X**
Spark Plug Replace Engine Manual
X
Engine Cooling Clean Shroud & Fins Engine Manual
System
Drive Belts Check For Wear And Pages 13, 19
Tension
Mower Blade Check For Wear, Damage Pages 14-15
& Replacement
Mower Deck Clean Debris Page 7
Accumulation
Transmission Check Grease Level Page 13
Grease
X
X
X
X
X
Periodic Grease Check Page 13
X**
Drive Disc Check for Wear Damage Pages 16-18
& Replacement
*Change oil every 25 hours when operating under heavy load or high temperatures.
**Clean more often under dusty conditions or when air debris is present
X
4.5 MAINTENANCE/REPLACEMENT PARTS
MAINTENANCE PARTS
Blade Control Cable 3-4608
Clutch Pull Cable (See Parts Manual) 3-4604
Cutter Blade (Air Lift Compatible) 1-9795
Cutter Blade (Mulching) 1-7168
Cutter Blade (Not Air Lift Compatible) 2-6691
Cutter Blade (Ninja - Quad Edge) 2-6407
Wheel Drive Pulley to Transmission Pulley Belt 1-2354
Engine to Drive Disc Belt 4-6784
Cantilever Drive Tire Assembly 5-7668
Rubber Drive Tire 4-1855
Parts Manual for 21" Steel Deck Walk Behind Mower Type 'M' Series 18 06138
EACH
SEASON
X
X
X
23

Snapper 18 Series Specifications

General

Brand	Snapper
Model	18 Series
Category	Lawn Mower
Language	English