Snapper 216517B User Manual

REAR WHEEL BRACKETS, LATCHES
Footnotes:
TP 400-5002-4-WB-N
Manual No. 700613621" STEEL DECK WALK BEHIND MOWERS
SERIES 17
17
Part No Descri
p
tionItem Qt
y
Note
1 7012312 2 BALL BEARING, 9/16” I.D.
2 7091012 3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx)
3 7035717 2 LATCH, Height Adjusting (Long)
4 7091576 1 NUT, 1/4-20 Hex Was 90063
5 7091601 6 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070
6 7054228 1 ASSEMBLY, Wheel Arm, Right Rear (Round hole) used on Push models (Incl.
items 3, 10, 14, 15 & 16)
7 7054229 1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl.
items 3, 11, 14, 15 & 16)
8 7054246 1 ASSEMBLY, Wheel Arm (Right Rear) Was 54230 (Self-Propelled
models)(Incl. 1, 2, 3, 12, 14, 15
& 16)
9 7054247 1 ASSEMBLY, Wheel Arm (Left Rear) Was 54231 (Self-Propelled
Models)(Includes 1, 2, 3, 13, 15,
& 16)
10 7033776 1 ARM, Round Axle End, Right Rear (Round hole) used on Push models
11 7033775 1 ARM, Square Axle End, Left Rear (Square hole) used on Push models
12 7032722 1 ARM, Wheel, Right Rear used on Self-Propelled models
13 7032723 1 ARM, Wheel, Left Rear used on Self-Propelled models
14 7011078 2 BOLT, 5/16-18 x 1” Shoulder
15 7011791 2 RETAINER, 5/16” Bolt
16 7027702 2 GRIP, Latch
17 7033494 1 BRACKET, Right Rear Wheel
18 7033495 1 BRACKET, Left Rear Wheel
19 7021119 1 AXLE Rear axle on Push Models;
Front axle on All Models
20 7035741 1 GUARD, Rear Foot used on Push models
21 7029008 1 GUARD, Rear Foot used on Self-Propelled models
(except European)
-- 7017010 1 GUARD, Rear Foot used on Euro Self-Propelled
models
22 7023791 1 RING, Split (Black) used on Self-Propelled models
23 7012616 1 SUPPORT, Foot Guard used on Self-Propelled models
24 7091604 1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 Was 90005 (used on Self-
Propelled models)
25 7090053 1 WASHER, 1/4” Internal Tooth Lock Was 91023
26 7090731 2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5

Snapper 216517B Specifications

General

Brand	Snapper
Model	216517B
Category	Lawn Mower
Language	English