HANDLES & CONTROLS
Footnotes:
TP 400-5002-4-WB-N
Manual No. 700613621" STEEL DECK WALK BEHIND MOWERS
SERIES 17
7
Part No Descri
tionItem Qt
Note
32 7079577 2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 used on All
33 7090053 3 WASHER, 1/4” Internal Tooth Lock Was 91023 (used on All)
34 7091576 3 NUT, 1/4-20 Hex GR5 or B Was 91100 (used on All)
35 7090505 1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on All
36 7014343 4 BUSHING used on All
37 7023792 1 PIN, 1/4” x 1-1/2” (for clutch handle) used on Self-Propelled
38 7091020 1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
39 7024211 1 DECAL, Blade Control (Left Hand Side) used on all (except Euro)
-- 7029782 1 DECAL, Blade Control (Left Hand Side) used on European
-- 7029785 1 DECAL, Handle International Warning used on European
40 7026141 1 GUIDE, Rope used on All
41 7075634 1 FOAM GRIP, .84 I.D. x 11” long Was 73115
-- 7075634 1 FOAM GRIP, .84 I.D. x 12” long
42 7024087 1 DECAL, Speed Select used on Self-Propelled (except
Euro)
-- 7029783 1 DECAL, Speed Select (Euro) used on Self-Propelled (Euro)
43 7023153 1 CLAMP, Casing used on All
44 7090391 4 WASHER, 5/16” Internal Tooth Lock used on All
45 7090545 1 SCREW, 5/16-24 x 1-1/2” Round Hd. Machine, GR5 used on All
46 7022779 1 GUIDE, Rope used on All
47 7074255 1 LEVER, Speed Control used on Self-Propelled
48 7046465 1 GUIDE, Rope used on Self-Propelled
49 7076978 1 NUT, 1/4-20 Hex GR5 or B used on Self-Propelled
50 7012080 1 CABLE-TIE, 7” used on Self-Propelled
52 7023154 1 SCREW, #10-32 x 5/8” Hex Head Self-Tap used on All
51 7079577 1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR5 used on Self-Propelled
53 7024649 1 WIRE TIE, 11” Long (Black) used on Self-Propelled
-- 7090505 1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on Self-Propelled
54 7026219 1 CLAMP, 7/8” Double Cable used on Self-Propelled
56 7072023 1 CONTROL, Swivel Wheel Lock Cable 56.5" used on Swivel Wheel
To Next Page
Loading...
