20
Regular
Maintenance
MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your tractor and mower. Use the hour meter to deter-
mine your operating time.
* Change original engine oil after initial break-in period. Refer to engine owner’s manual.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
*** Service after the first 25 hours of operation, then every 250 hours of operation.
Before Every Every Every Every Spring
SAFETY ITEMS Each Use 5 Hours 25 Hours 100 Hours 250 Hours & Fall
Check Grass Collector for Wear ●
Check Safety Interlock System ●
Check Tractor Brakes ●
Check Mower Blade Stopping Time ●●
Before Every Every Every Every Spring
TRACTOR MAINTENANCE ITEMS Each Use 5 Hours 25 Hours 100 Hours 250 Hours & Fall
Check Tractor/Mower for loose hardware ●
Check / Clean Cooling Fins ●
Check / Adjust PTO Clutch ●●
Lubricate Tractor & Mower ** ●
Lubricate Rear Axle Shafts Yearly
Clean Battery & Cables ●
Check Tire Pressure ●
Clean Deck & Check/Replace Mower Blades ** ●
Perform Transmission Maint. (Varies by Model) ***●
Check Mower Blade Timing (40” Mowers) Yearly
Check Arbor Drive Belt Tension (40” Mowers) Yearly
Before Every Every Every Every Spring
ENGINE MAINTENANCE ITEMS Each Use 5 Hours 25 Hours 100 Hours 250 Hours & Fall
Check Engine Oil Level ●
Check / Change Engine Air Filter
Change Engine Oil & Filter *
Inspect Spark Plug(s)
Check / Replace Fuel Filter
These procedures and their service intervals can be found in the
engine manufacturer’s owner’s manual. Always refer to the
engine manual for engine-related information.
To Next Page
Loading...
