Snapper CP215519HV - Page 11

CUTTING DECK, BLADE
Footnotes:
TP 400-5189-A-WB-N
Manual No. 700615521" STEEL DECK WALK BEHIND
SERIES 19 & 20
11
Part No Descri
p
tionItem Qt
y
Note
1 7500081 1 * WELDMENT, Deck, 21” Non-Adjust Air was 7400026, used on
CRP216019KWV
1 7400027 1 * WELDMENT, Deck, 21”, S.P., Hi-Vac used on CP216019KWV,
CP215519HV & CP215520HV
2 7091601 3 NUT, 5/16-18 Hex Flange Lock GR 5 was 7091070
3 7090731 3 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR 5 or 7092061
4 7046780 2 PLUG, Hole, Polyethylene
5 7090001 1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR 5 or 7091508
6 7011791 1 RETAINER, 5/16” Bolt
7 7090700 1 BOLT, 5/16-18 x 1-1/2” Hex Flange Lock, GR5 engine mount bolts (Honda)
8 7091601 1 NUT, 5/16-18 Hex Flange Lock, GR 5 was 7091070 or 7090585
9 7090238 2 SCREW, 5/16-24 x 1” Hex Head Cap GR 5 engine mount bolts (Honda)
10 7091315 2 WASHER, .32 x .58 x .08 Split Lock on engine mount bolts (Honda)
11 7074568 1 COVER, Belt
12 7015780 1 PULLEY- Engine (25mm I.D. x 2-1/8” O.D.) used on Kawasaki engines
12 7021822 1 PULLEY- Engine (1.085 I.D. x 2-1/8” O.D.) used on Honda engines
13 7090201 1 SCREW, 5/16-18 x 5/16” Hex Socket Head used with 7015780
13 7092086 1 SCREW, 5/16-18 x 1/2” Hex Socket Head used with 7021822
14 7091214 1 KEY, Woodruff #HP-506 Hi-Pro
15 7090167 1 SCREW, 3/8-24 x 2” Hex Head Cap, GR 5
16 7012063 2 WASHER, Cone
17 7026691 1 BLADE, Cutter (Standard Lift)
18 7026407 1 BLADE, 21” Ninja (Quad Edge)
19A 7101414 1 ** HUB, Blade Drive, 25mm I.D. RD 2 Position used on CRP216019KWV
19B 7015626 1 ** HUB, Blade Drive, 25mm I.D. used on CP216019KWV
19C 7012927 1 ** HUB, Blade Drive, 7/8” I.D. used on CP215519HV &
CP215520HV
20 7010783 2 KEY, #505 Hi-Pro
21 7090228 4 SCREW, 5/16-24 x 21/32” Oval Head Machine
22 7032558 2 AIR LIFT
23 7090391 4 WASHER, 5/16” Internal Tooth Lock
24 7090223 4 NUT, 5/16-24 Hex, GR 5
25 7300969A 1 RING, Engine Spacer used on CP215520HV model
26 7044770 3 SPACER, .06 Blade Hub used on CP215520HV model
1 *** ENGINE, 6 HP Kawasaki w/side recoil Model FJ180V-DS13-
R (not shown)
1 *** ENGINE, 6 HP Kawasaki w/side recoil Model FJ180V-BS23-
R (not shown)
1 *** ENGINE, 5.5 HP Honda Model GXV160, Type K1A1AS (not
shown)
used on CP215519HV
1 *** ENGINE, 5.5 HP Honda Model GXV160, Type UH2A1AS (not
shown)
used on CP215520HV model
NOTE: * FINISH: red painted but w/o decals
NOTE: ** Part number is inscribed on hub.
NOTE: *** Purchase engine parts from engine manufacturer dealer.
Not for
Reproduction