DRIVE SYSTEM SELF-PROPELLED
Footnotes:
TP 400-5189-A-WB-N
Manual No. 700615521" STEEL DECK WALK BEHIND
SERIES 19 & 20
17
Part No Descri
tionItem Qt
Note
1 7012354 1 BELT, Poly-V
2 7011724 1 WASHER, 44 x .78 x .025 Curved
7051913 1 ASSEMBLY, Clutch Idler (incl. items 3 thru 6)
3 7034179 1 LINK, Differential
4 7090391 1 WASHER, 5/16” Internal Tooth Lock
5 7091542 1 SCREW, 5/16-18 x 1/2” Pan Head Self-Tap (Torx)
6 7500154 1 ASSEMBLY, Idler Arm, Bushing & Spacer
7 7032832 1 ARM, Clutch Idler
8 7012306 4 BUSHING, Flange (Powdered Metal)
9 7100447 1 SPACER, Idler Arm
10 7090303 1 NUT, 1/4-28 Hex Top Lock
11 7012124 1 PULLEY, Idler
12 7091025 1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap, GR 5
13 7091597 1 COTTER PIN, 3/32 x 1/2” was 7090555
14 7012122 1 SPRING, Clutch- 21S
15 7012126 1 SPRING, Idler- Torsion
16 7012111 1 STUD, Idler (3/8-24 thread)
17 7031873 1 HOLDER, Bearing (Inner Half)
18 7090390 3 WASHER, 3/8” Internal Tooth Lock
19 7091630 3 NUT, 3/8-24 Hex
20 7012316 1 WASHER, 3/8” Flat
21 7028014 1 BALL BEARING, Spherical O.D., .38 I.D.
22 7011025 1 O-RING
23 7031809 1 HOLDER, Bearing (Outer Half)
24 7091122 2 SCREW, 1/4-20 x 1/2” Hex Flange Self-Tap was 7090539
25 7090289 1 NUT, 3/8-24 Hex Center Lock, GR 5
26 7012125 1 GUIDE, Thrust Plate (3/8-24 thread)
27 7300977A 1 THRUST PLATE, Short was 7034281
28 7090122 1 WASHER, 3/8” Flat
29 7090981 4 SCREW, #10-32 x 1/4” Self-Tap Machine
30 7010746 1 RETAINING RING, .625 External
31 7090673 1 COTTER PIN, .06 x .50 was 7091629
32 7091294 1 WASHER, .28 x .63 x .06 Flat
33 7074145 1 LINK, Transfer (1/4-28 thread)
34 7029027 1 BALL BEARING, 3/4” Bore- Commercial
35 7061276 1 * ASSEMBLY, Bushing & Hub was 7053217, Incl. Hub
(7017073), Bushing (7014678),
Hex, Drive Bushing (7011108) &
2 #10-24 x 1/2” Hex Self-Tap
Screws (7090913)
36 7023364 1 DRIVEN RING, 21P was 7010927
* NOTE: Driven Disc Ass'y (7501000) is composed of items 18, 19, 26-30, 32 & 34-38. Was 7073390
To Next Page
Loading...
