Snapper CP215519HV - Page 7

HANDLES & CONTROLS - Upper End
Footnotes:
TP 400-5189-A-WB-N
Manual No. 700615521" STEEL DECK WALK BEHIND
SERIES 19 & 20
7
Part No Descri
p
tionItem Qt
y
Note
35 7091585 1 NUT, 3/8-16 Hex Center Lock
36 7074113 1 LEVER, Shift
37 7075182 1 KNOB, Shift
38 7091167 1 SCREW, #8-32 x 1/2” Cross Recess Filister Head Machine
39 7091018 1 NUT, #8-32 Hex
40 7090188 3 WASHER, 3/8” Flat
41 7034162 1 COTTER PIN, 5/16 Self Lock
42 7024641 1 TIE, Wire, 1.29 long, black
43 7076978 1 NUT, 1/4-28 Hex Nyloc
44 7012080 2 CABLE-TIE, 7”
45 7078026 1 THROTTLE CONTROL, 5.5 HP, Honda (50.81” long) used on CP215519HV &
CP215520HV
45 7074138 1 THROTTLE CONTROL, 6.0 HP Kawasaki (53.25” long) used on CP216019KWV &
CRP216019KWV
46 7075308 1 THROTTLE KNOB
Not for
Reproduction