HANDLES & CONTROLS - Lower End
Footnotes:
TP 400-5189-A-WB-N
Manual No. 700615521" STEEL DECK WALK BEHIND
SERIES 19 & 20
9
Part No Descri
tionItem Qt
Note
1 7033985 1 HANDLE, Lower LH (Adjustable)
2 7033986 1 HANDLE, Lower RH (Adjustable)
3 7091026 2 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR 5
4 7091601 3 NUT, 5/16-18 Hex Flange Lock GR 5 was 7091070
5 7046707 2 STRAP, Handle
6 7090095 4 NUT, 1/4-28 Hex, GR 5
7 7015753 2 BALL JOINT, 1/4-28
8 7090053 4 WASHER, 1/4” Internal Tooth Lock
9 7090595 5 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR 5
10 7090585 10 NUT, 5/16-18 Hex Flange Lock, GR 5
11 7073822 1 BRACKET, Bell Crank
12 7013849 1 SPACER, .33 x .63 x .156
13 7073913 1 BELL CRANK
14 7091130 2 WASHER, .33 x .88 x .09 Flat
15 7091904 1 SCREW, 5/16-18 x 7/8” Hex Head Cap, GR 5
16 7091190 4 BOLT, 5/16-18 x 1-1/2” Curved Head
17 7091575 1 NUT, 5/16-18 Hex Center Lock was 7091067
18 7090238 1 SCREW, 5/16-24 x 1” Hex Head Cap GR5
19 7012114 1 BUSHING, Differential
20 7090895 1 NUT, 5/16-18 Tee
21 7091606 1 NUT, 5/16-24 Hex Center Lock, GR 5 was 7091074
22 7090391 4 WASHER, 5/16” Internal Tooth Lock
23 7091511 4 NUT, 5/16-18 Hex, GR 5 was 7091069
24 7090188 1 WASHER, 3/8” Flat
To Next Page
Loading...
