Snapper ERZT185440BVE, ERZT20441BVE2, RZT22500BVE2, RZT22501BVE2 - CONTROL GROUP, LH, ERZT (Series 0

CONTROL GROUP, LH, ERZT (Series 0)
Footnotes:
TP 400-5182-D-HZ-N
Manual No. 7006461RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
21
Part No Descri
p
tionItem Qt
y
Note
1 7043338 1 HANDLE
2 7043336 1 WELDMENT, LH Control Arm (5/8” dia. Rod)
3 7100051 1 FOAM GRIP, Handle
4 7013874 2 BUSHING, Bronze, 5/8 x 5/8”
5 7043301 1 WELDMENT, Control Arm, LH
6 7900016 1 WASHER, 5/8 ID x 1.00 OD x .065 Nylon
7 7027344 1 WASHER, 5/8” Flat SAE
8 7011121 1 WASHER, .64 x 1.12 x .028 Beveled
9 7090658 2 NUT, 5/8-18 Hex Jam
10 7200012 1 SHOULDER BOLT, 3/8-16 2.013 long shoulder
11 1670971 1 THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
12 7014409 2 FLANGE BEARING, 9/16 I.D. P.M. powdered metal
13 7091299 2 NUT, 3/8-16 Hex Nyloc or 7091585 (center lock nut)
14 7900003 1 SHOULDER BOLT, 5/16 x 1/4-20 .800 long shoulder
15 7100695 1 SPRING, Extension, RTN, ERZT
16 7200006 3 SPACER, 9/16” OD x 12GA x .325
17 7100415 2 WASHER, 1/4” I.D. Flat case hardened steel
18 7091603 2 NUT, 1/4-20 Hex Nyloc
19 7900002 1 SHOULDER BOLT, 5/16 x 1/4-20 1.360 long shoulder
20 7090482 1 NUT, 3/8-24 Hex Jam
21 7900029 2 SCREW, 1/4-20 x 1-1/4” Hex Head Cap, GR 5
22 7092126 2 NUT 1/4-20 Hex Center Lock, GR 5 YZ
23 7090290 6 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
24 7300009 1 PLATE, Fwd/Rev Adjust
25 7300010 1 TRACK, Control Stick, L.H.
26 7043302 1 CONTROL BRACKET, LH
27 7091304 4 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
28 7091619 4 NUT, 3/8-16 Hex Flange Lock
29 7300264 1 BRACKET, Rod Holder, RZT
30 7091095 2 POP RIVET, 1/8 x 3/8”
7500059 1 ASSEMBLY, Fwd/Rev Rod Includes items: 31, 33(2), 34(2),
35 & 36.
31 7027936 1 ROD END
32 7091497 1 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR 5
33 7091630 2 NUT, 3/8-24 Hex, GR B, YZ
34 7090517 3 WASHER, 3/8” Flat
35 7074511 1 SPRING, Compression (Brake)
36 7200009 1 ROD, Link Fwd./Rev. (3/8-24 thread)