Snapper Lawn Mower Accessory - Page 21

21
6-3281 ACCESSORY, 33” TWIN BAG GRASS CATCHER
ITEM PART NO. DESCRIPTION
1 5-9626 COVER ASS’Y
2 1-9295 DECAL, Snapper (11-1/2” Long)
3 9-1545 NUT, 1/4-20 Flange Lock (5)
4 5-9951 FRAME STRUCTURE (includes indented items)
- 2-3797 PAD, Bumper Mount (2)
- 9-0188 WASHER, 5/16” Flat (2)
- 9-0184 LOCKNUT, 5/16-18 (2)
- 9-0577 BOLT, 5/16-18 x 1-1/2" Carriage (2)
5 9-1611 SCREW, 1/4-28 X 3/4" Hex Cap (4)
6 3-8087 HINGE, Top (2)
7 9-0238 SCREW, 5/16-24 x 1" Hex Cap (2)
8 9-1296 WASHER, 5/16 Flat (6)
9 9-1605 NUT, 1/4-28 Hex (4)
10 9-1314 WASHER, 1/4" Lock (8)
11 9-1315 WASHER, 5/16" Split Lock (2)
12 9-1606 NUT, 5/16-24 Hex Lock (2)
13 9-1503 COTTER, Hairpin (3)
14 3-6073 BRACE, Short (includes indented item)
- 5-1407 SPRING & HOOK ASS’Y
- 4-6573 BRACE, Long (includes indented item)
- 5-1407 SPRING & HOOK ASS’Y
15 2-9841 PIN, Clevis (3)
16 1-9966 INLET
17 1-9725 SECTOR
18 9-1530 BOLT, 1/4-20 x 3/4" Carriage (4)
19 5-7652 SCREEN ASS'Y (includes indented items)
- 1-9732 FRAME
- 1-9731 SCREEN
20 5-1930 BAG ASS'Y (includes indented items) (2)
- 1-9250 BAG, Grass Catcher (2)
- 1-9965 ROD, Bag Support (2)
- 1-4456 CONNECTOR, Rod (2)
21 9-1604 BOLT, 1/4-20 x 1/2 Grade 5 (5)
22 9-1576 NUT, 1/4-20 Hex (8)
23 9-1294 WASHER, 9/32" Flat (4)
24 9-1314 WASHER, 1/4 Lock (4)
25 3-7745 HANDLE, Tube
26 3-1952 BASE, Tube Handle
27 9-1614 BOLT, 1/4-20 X 3/4" Carriage (4)
28 3-1951 LATCH, Chute Tube
29 1-9912 ADAPTER
30 1-1910 DECAL, Caution
31 1-4517 TUBE, Grass
32 9-1537 WING-NUT, 5/16-18
33 9-1303 BOLT, 5/16-18 X 1"
34 9-1575 NUT, 5/16-18 Hex Lock (2) (not used, extra)
35 9-1612 BOLT, 5/16-18 X 1-1/2" Carriage (2) (not used, extra)
-- 3-1954 BRACKET, Bumper Reinforcement (Shown on page 1)
-- 7-1677 SHIELD, Muffler (Shown on page 1)
-- 7-2416 WEIGHT, Front Frame (6) (Rider only) (Shown on page 2)
-- 9-1976 SCREW, 5/8-11 x 1-3/4 Hex Cap (2) (Rider only) (Shown on page 2)
-- 9-0333 WASHER, 5/8 Split Lock (2) (Rider only) (Shown on page 2)
-- 9-0537 NUT, 5/8-11 Hex (2) (Rider only) (Shown on page 2)
-- 9-1553 SCREW, 3/8-16 x 1-3/4” Hex Cap (2) (Rider only) (Shown on page 3)
-- 9-1320 WASHER, 3/8 Split Lock (2) (Rider only) (Shown on page 3)
-- 9-1302 NUT, 3/8-16 Hex (2) (Rider only) (Shown on page 3)
LT SERIES (Small Frame) MANUAL No. 06613