20
Regular Maintenance
Lubrication
Service Interval: Every 25 Hours
Lubricate the unit at the locations shown in Figures 14-
16 as well as the lubrication points listed. Generally, all
moving metal parts should be oiled where contact is
made with other parts. Keep oil and grease off belts and
pulleys. Wipe surfaces clean before and after
lubrication.
Grease:
• steering linkage
• mower linkage
• rear axle shafts (remove wheel hubs)
• front axle pivot
Use grease fittings when present. Automotive lithium
grease is recommended.
Oil:
• foot pedal rods & brackets
• seat adjustment assembly
• draglink
• mower deck height adjustment linkage
• transmission idler assembly
Figure 14. Lubricate Tractor
To Next Page
Loading...
Need help?
General
