Specifications
MOWER DECK
Cutting Width 42" (106,7 cm)
Base Deck Platform Side Discharge
Number of Blades/Type 2, Standard Lift
Frame Suspension Frame Hung
Deck Support Wheels/Number Standard, 2 Anti-Scalp Wheels
Height-of-Cut 1.5" to 4.0" (3,8 to 10,2 cm)
Mower Lift Electric Height-of-Cut
Cutting Positions Infinite
DIMENSIONS
Overall Length 71" (180 cm)
Overall Width (with deflector) 46" (117 cm)
Overall Height 45" (114 cm)
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained
and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient
operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed
and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated
gross power when used in a given piece of power equipment (actual “on-site” or net horsepower). This difference is due to
a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
Replacement Parts
We recommend that you see an authorized Snapper/Briggs &
Stratton Dealer for all maintenance and service of the tractor/
engine and parts.
Accessories
For a list of the available accessories, see an authorized Snapper
Dealer. You can contact Customer Service by phone at (800) 317-
7833, or locate a dealer on the Internet at www.snapper.com.
Parts and Accessories
ENGINE
19.5 Gross HP Briggs & Stratton
Model Professional Series
TM
, Single Cylinder
Horsepower 19.5 Gross HP @ 3600 rpm
Displacement 30.5 cu in. (500 cc)
Electrical System Alternator: 9 amp Regulated,
Battery: 12V-230 CCA
Oil Capacity 48 oz (1,4 L)
Engine Oil Synthetic 5W30
Spark Plug Gap 0.030 in. (0,76 mm)
Spark Plug Torque 180 in-lbs (20 Nm)
Fuel Tank Capacity Capacity: 4.0 gal (15,1 L)
CHASSIS
Seat Mesh, Suspension
Seat Adjustment 9-Position
Turning Radius 14 in. (35,6 cm)
Front Wheels Tire Size: 15 x 6.0/
Inflation Pressure: 12-14 psi (0,82 -0,96 bar)
Rear Wheels Tire Size: 20 x 8.0-8
Inflation Pressure: 10 psi (0,68 bar)
TRANSMISSION
Make Tuff Torq® K46
Type Foot Pedal Hydrostatic
Ground Speed Forward: 0-5.6 MPH (0-9,0 km/h)
Reverse: 0-3.5 MPH (0-5,6km/h)
Drive Belt
Brakes Manual
Engine Power Rating Information
29
en
To Next Page
Loading...
