Need help?Do you have a question about the Snapper PRO S120 and is the answer not in the manual?
General| Engine Displacement | 344 cc |
|---|---|
| Cutting Height | 1.5-4 inches |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Ground Speed Forward | 5.5 mph |
| Starting System | Electric |
Locates and explains the product identification tag for model and serial numbers.
Provides crucial safety information and rules for operating the mower safely.
States warnings about chemicals known to cause cancer or reproductive harm.
Details essential safety rules for operating the mower to prevent injury and damage.
Explains hazards and safe practices for operating the mower on slopes.
Warns about mower blades throwing objects and advises on area cleanup.
Highlights tragic accidents that can occur with children around the unit.
Discusses hazards associated with moving parts and safety systems.
Instructs on the proper use of a rigid roll bar for operator safety.
Details the proper use of a folding roll bar for operator safety.
Warns about hazards related to operating near retaining walls, drop-offs, and water.
Advises checking for overhead clearances before driving under objects.
Provides initial safety guidelines for refueling and general maintenance.
Warns about operating the unit in enclosed areas due to carbon monoxide risk.
Explains how to measure lawn slope using a smartphone or angle finder.
Emphasizes the importance of operator training and understanding manual instructions.
Outlines necessary preparation steps before operating the mower, including clothing and area inspection.
Covers essential operational rules like no enclosed areas, daylight mowing, and starting procedures.
Details precautions and rules for operating on slopes to prevent accidents.
Warns about high sound levels and the need for hearing protection.
Notes that engine exhaust contains chemicals known to cause health issues.
Provides critical safety guidelines for handling gasoline to prevent fires and explosions.
Reemphasizes the danger to children and the need for constant vigilance.
Covers maintaining safety devices, general repairs, and authorized service.
Warns about high-pressure hydraulic fluid injection injuries.
Warns about stored energy in springs and the need for professional release.
Warns against removing the radiator cap while the engine is hot.
Provides instructions and warnings for models equipped with a Roll Over Protection System (ROPS).
Details inspection procedures for the roll bar to ensure its integrity and effectiveness.
Outlines inspection and maintenance steps for the seat belt and its retraction mechanism.
Advises reading and understanding safety decals for personal injury prevention.
Shows various decals and their part numbers, and explains safety icons.
Explains the meaning of common safety icons found on the machine and its accessories.
Lists various danger and warning statements related to amputation, loss of traction, tipping, etc.
Explains safety icons associated with an optional jack kit accessory.
Defines safety alert symbols (DANGER, WARNING, CAUTION, NOTICE) and signal words.
Explains the function of safety interlock switches and necessary operational checks.
Identifies and describes the various controls for the zero-turn rider.
Explains how to use the deck lift pedal, pin, and lever to adjust cutting height.
Details how to engage and disengage the parking brake.
Describes the function and operation of the ground speed control levers.
Explains the use of the retractable seat belt in relation to the roll bar.
Describes the function of the fuel tank cap, fuel gauge, and seat adjustment lever.
Explains how to remove and reinstall the floor plate for better access.
Details the function of transmission release levers for pushing the unit by hand.
Explains how transmission oil is added and its purpose.
Identifies and explains the controls on the instrument control panel.
Guides on initial setup and familiarization before operating the unit for the first time.
Lists essential checks to perform before starting the engine and operating the mower.
Provides instructions and warnings for starting the engine of the mower.
Details the proper procedure for safely stopping the mower.
Offers guidance and tips for practicing zero-turn driving maneuvers.
Describes the best method for handling ground speed control levers for smooth travel.
Outlines basic driving practices, focusing on forward travel and speed adjustment.
Provides instructions for practicing reverse travel and backing up.
Guides on how to practice turning the mower around a corner.
Explains the technique for performing a zero-turn maneuver in place.
Details advanced driving techniques, like executing an end-of-row zero turn.
Provides step-by-step instructions for the mowing process.
Discusses the importance of proper grass cutting height for lawn health and mower performance.
Offers guidelines on the best time of day and grass height for optimal mowing results.
Advises on best practices for mowing patterns to achieve a good cut and avoid matting.
Explains the broadcast mowing method, including engine speed and ground speed.
Provides guidance on the maximum amount of grass to cut in a single pass.
Details the mulching method, conditions required, and engine/ground speed recommendations.
Provides instructions on how to push the rider by hand, including disengaging transmission.
Gives detailed instructions and safety warnings for raising and lowering the folding roll bar.
Advises on the maximum weight for towed trailers and secure attachment.
Provides step-by-step instructions and safety warnings for checking and adding fuel.
Instructs on checking the engine oil level before each use.
Guides on checking and filling the transmission oil level for proper operation.
Lists lubrication points and types of grease and oil recommended for the unit.
Shows the location and identification of fuses within the electrical system.
Explains the importance of checking tire pressure for traction, stability, and tire life.
Provides annual lubrication instructions for the front caster wheels.
Details how to adjust the mower deck cutting height using the pin and pedal.
Explains how to adjust the deck lift foot pedal for operator comfort.
Describes how to remove and reinstall the floor pan for mower deck access.
Provides guidelines for storing the unit for short periods, emphasizing fuel safety.
Outlines steps for preparing the unit for long-term storage, including maintenance and fuel handling.
Lists steps to follow when starting the unit after it has been stored for a long period.
Provides a comprehensive schedule for routine unit and engine maintenance.
Lists technical specifications for the mower models and their components.
Details the limited warranty policy, coverage, and conditions for the product.
Lists exclusions from warranty coverage, including improper use, maintenance, and wear.
A blank page for user notes.
A blank page for user notes.
To Next Page
