Snapper SERIES 19 - Page 29

ELECTRIC START COMPONENTS
Footnotes:
TP 400-5187-B-WB-N
Manual No. 700614921" STEEL DECK WALK BEHIND MOWERS
SERIES 19
29
Part No Descri
p
tionItem Qt
y
Note
1 7067012 1 * KIT, Battery 12V
1 7067012 1 BATTERY, 12 Volt, 35 CCA or 7019763
2 7015488 1 HARNESS, Battery
3 7043977 2 SCREW, #10-24 x 1/2” Pan Head Machine
4 7090932 2 NUT, #10-24 Square
5 7041710 1 SWITCH ASSEMBLY (Incl. items 6 thru 11)
6 7011138 1 KEY, (Set of Two)
7 7023506 1 BEZEL, (Seal & Face Nut)
8 7029080 1 COVER, Switch
9 7012685 1 NUT, 5/8-32 Hex Lock
10 7028765 1 SWITCH, Ignition (spring loaded ON/OFF 2 prong)
11 7016132 1 SPACER
12 7078025 1 WIRING HARNESS, B&S WBM similar to 7074383
13 7032906 1 BRACKET, Battery
14 7036132 1 COVER, Battery
15 7090731 2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR 5
16 7090585 3 NUT, 5/16-18 Hex Flange Lock, GR 5 or 7091601
17 7012652 1 CLIP, Wiring
18 206838YP 1 CHARGER, Battery (120 Volt; 60 Hertz) or 7018834
19 7091026 1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR 5 or 7090799
20 7011791 1 RETAINER, 5/16” Bolt
NOTE: * For battery (120V/12V) and charger kit order 7061267.