Snapper 10 Series - User Manual

Safety Instructions & Operator’s Manual
SERIES 10
AUTOMATIC BLADE STOP &
SMOOTH START CLUTCH EQUIPPED
RIDING
MOWERS
125061OT
(* 1 YEAR)
26061OT
Thank you for buying a SNAPPER product! Before operating your mower, read this manuai carefuiiy
and pay particuiar attention to the Important Safety Instructions on page 2. Remember that mowers
and ail power equipment can be dangerous if used improperly and keep in mind that safety requires
careful use in accordance with the instructions and....common sense!
1 i
This Operator's Manual covers SERIES 10 (last two numbers in the multi-digit model designation) REAR
ENGINE RIDING MOWERS. The first two digits Indicate the wkfth of cut. The next two digits give the
horsepower rating. Models having a "B" suffix are Briggs & Str^on powered, and those with a "T". are
powered by Tecumseh engines. Models having an "E" suffix are Electric Start.
|i2r2311XREV. l. 2/92^^^
SNAPPER POWER EQUIPMENT
McDonough, GA., 30253 U.S.A. I ^

Snapper 10 Series Specifications

General

Cutting Width	21 inches
Number of Blades	1
Deck Material	Steel
Mulching Capability	Yes
Engine	Briggs & Stratton
Fuel Capacity	1.5 quarts
Cutting Height	1.25 - 3.75 inches
Transmission	Self-propelled
Engine Type	4-Cycle
Weight	85 lbs
Fuel Tank Capacity	1.5 quarts
Self-Propelled	Yes

Summary

Important Safety Instructions

Child and Pet Safety Guidelines

Rules to ensure the safety of children and pets during mower operation.

Tip-over Prevention on Slopes

Precautions to prevent mower tip-overs on slopes and uneven terrain.

General Mower Operation Precautions

Essential safety guidelines for mower operation and maintenance.

Pre-Operation Checks and Service

Pre-Start Checks

Essential checks and basic service before operating the mower.

Engine Operation

Starting and Stopping the Engine

Step-by-step guide for starting and stopping the mower's engine.

Mower Blade Operation

Starting and Stopping the Mower Blade

Instructions for engaging and disengaging the mower blade.

Lubrication Schedule and Engine Service

Belt, Brake, and Clutch Adjustments

Belt Tension Adjustment and Replacement

Procedure for adjusting and replacing the mower's drive belt.

Blade Brake Adjustment

Wheel Brake Test and Adjustment

Clutch and Blade Service Procedures

Clutch Engagement Adjustment

Cutting Blade Service

Cutting Deck and Battery Maintenance

Cutting Deck Service

Deck Side-to-Side Leveling

Deck Front-to-Rear Adjustment