Snapper SERIES 19 - Page 9

CUTTING DECKS, BLADES
Footnotes:
TP 400-5187-B-WB-N
Manual No. 700614921" STEEL DECK WALK BEHIND MOWERS
SERIES 19
9
Part No Descri
p
tionItem Qt
y
Note
-- 1 * ENGINE, Kawasaki 6.0 HP, Mod. FJ180V-DS13-R used on RP216019KWV
-- 1 * ENGINE, Kawasaki 6 HP Mod. FJ180V-BS23-R used on P216019KWV
-- 1 * ENGINE, B&S 675 Series Mod. 126L02-0113-F1 used on N2167519B &
NP2167519B
-- 1 * ENGINE, B&S 675 Series XRM, B1 Mod. 126T02-0200-B1 used on 2167519B &
P2167519B
-- 1 * ENGINE, DOV 700 Series Mod. 100602-0121-B1 used on RP2167519BDV
-- 1 * ENGINE, B&S 875 Series XIC, F1 Mod. 12S602-0110-F1 used on NP2187519BV
-- 1 * ENGINE, B&S 875 Series, Intek 12S502-0112-B1 used on RP2187519BV &
P2187519BV
-- 1 * ENGINE, B&S 875 Series, Intek, ES, 12S507-0115-B1 used on RP2187519BVE &
P2187519BVE
1 7400026 1 WELDMENT, Deck, 21” Non-Adjust Air finish: red painted but w/o decals
1 7400027 1 WELDMENT, Deck, 21” S.P., HV, Core Model finish: red painted but w/o decals
1 7400029 1 WELDMENT, Deck, 21” Push, HV, Core Model finish: red painted but w/o decals
2 7091070 3 NUT, 5/16-18 Hex Flange Lock, GR 5
3 7090731 3 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR 5
4 7046780 2 PLUG, Hole, Polyethylene
5 7011791 1 RETAINER, 5/16” Bolt
6 7090001 1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR 5 or 7091508
7 7090324 3 SCREW, 3/8-16 x 1” Self-Tapping engine mount bolts
8 7074568 1 COVER, Belt
9 7015780 1 PULLEY, Engine (25mm I. D. x 2-1/8” O.D.)
10 7090201 1 SET SCREW, 5/16-18 x 5/16” Hex Socket
11 7091214 1 KEY, Woodruff #HP-506 Hi-Pro
12 7015626 1 HUB, Blade Drive, 25 mm I.D.
13 7101414 1 HUB, Blade, 21” WBM, RD, 2 Position
14 7012063 2 WASHER, Cone
15 7090167 1 SCREW, 3/8-24 x 2” Hex Head Cap, GR 5
16 7026691 1 BLADE, 21” Standard Lift
17 7026407 1 BLADE, 21” Ninja (Quad Edge) Used on Recycling Models
NOTE: * Purchase engine parts from engine manufacturer dealer.