Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
5
SYMBOLS
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Direct Current Type or a characteristic of current
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s
Manual
To reduce the risk of injury, user must read and understand operator’s
manual before using this product.
Safety Alert Precautions that involve your safety.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Eye Protection
Always wear safety goggles or safety glasses with side shields and, as
necessary, a full face shield when operating this product.
Cutting Hazard Keep feet and hands away from rotating tines.
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOLS SIGNAL MEANING
DANGER
Indicates an imminently hazardous situation, which, if not avoided, will result in death
or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could result in death
or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in minor
or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
