Why is the mower cutting height difficult to adjust on my Snapper Z-Mow / 150Z Lawn Mower?
If the mower cutting height on your Snapper Lawn Mower is difficult to adjust, thoroughly clean and lubricate the cutting height crank with oil if the threads are dirty or require lubrication.
Why is the mower cut uneven with my Snapper Lawn Mower?
If your Snapper Lawn Mower cut is uneven: * Consult the Maintenance Section for proper and equal tire inflation. * See "Mower Leveling" in Service & Adjustments for proper mower leveling.
General| Deck Material | Steel |
|---|---|
| Engine Type | Briggs & Stratton |
| Drive System | Rear-wheel drive |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Warranty | 2 years limited |
Instructions for safe operation of the unit.
Guidelines for safe operation on slopes.
Safety precautions regarding children.
Steps to perform before starting the unit.
Types of gasoline and fuel additives recommended.
Brief description of individual controls.
Procedure for operating the mower.
Guidance on learning to operate the rider.
Schedules for rider and engine maintenance.
Lubrication points and intervals for the unit.
How to clean the deck and service mower blades.
Procedures for checking and changing engine oil and filter.
Procedures for leveling the mower deck.
Instructions for storing the unit for the off-season.
Guide to common problems, causes, and remedies.
To Next Page