Snapper Z1202B User Manual

20. VEHICLE SHOULD BE STOPPED AND INSPECTED FOR DAMAGE after striking a foreign object
and the damage should be repaired before restarting and operating the equipment. Stop immediately
and check for damage or loose parts if mower should start vibrating.
21. DISENGAGE BLADES BEFORE DRIVING ACROSS WALKS or projecting objects.
22. KEEP SAFETY DEVICES AND GUARDS IN PLACE. If any of the safety switches become
inoperable, have them repaired immediately.
23. DO NOT STEP OR STAND ON THE MOWER HOUSING. Step or stand only on the foot deck.
24. WATCH OUT FOR TRAFFIC near roadways and when crossing roads.
25. THIS MACHINE IN NOT MEANT FOR HIGHWAY OR STREET USE. It is not a recreational vehicle
and it should not be operated as such.
26. DO NOT USE MOWER WHEN GRASS IS WET OR SLIPPERY.
28. MOW ONLY DURING DAYLIGHT.
29. ALWAYS DISENGAGE THE MOWER BLADE CLUTCH when transporting.
SAFETY INTERLOCK SYSTEM
Your Snapper Zero Turning Radius Mower is equipped with switches interlocked for your safety.
1. The mower blades must be disengaged before the engine will start.
2. The Joystick control lever must be in neutral "DOWN" position before the engine will start.
3. The engine will stop if the mower blade clutch is engaged when the operator leaves the driver's seat.
4. The engine will stop if the Joystick control lever is not in the neutral "DOWN" position when the
operator leaves the driver’s seat.
5. The. engine will stop if the brake is "SET" and the Joystick control lever is moved to the "UP" position.
6. The engine will stop if the brake is "SET" and the mower blade clutch is engaged.
DO NOT OPERATE MOWER IF SAFETY
SWITCHES ARE NOT OPERATING PROPERLY
3

Snapper Z1202B Specifications

General

Brand	Snapper
Model	Z1202B
Category	Lawn Mower
Language	English