RegularMaintenance
MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your rider and mower. You will need to keep a record
of your operating time. Determining operating time is easily accomplished by observing the elapsed time
recorded by the hour meter.
SAFETY ITEMS Before Every 5 Every 25 Every Every Spring
Each Hours Hours 100 200 & Fall
Use Hours Hours
Check Safety Interlock System • •
Check Rider Brakes • •
Check Mower Blade Stopping Time • •
RIDER MAINTENANCE ITEMS Before Every 5 Every 25 Every Every Spring
Each Hours Hours 100 200 & Fall
Use Hours Hours
Check Rider / Mower for loose hardware •
Check / Clean Engine Cooling Fins •
Check / Adjust PTO Clutch •
Lubricate Rider & Mower ** •
Clean Battery & Cables •
Check Tire Pressure •
Clean Deck & Check/Replace Mower Blades** •
Check Transmission Oil •
Change Transmission Oil Filter ** •
ENGINE MAINTENANCE ITEMS Before Every 5 Every 25 Every Every Spring
Each Hours Hours 100 200 & Fall
Use Hours Hours
Check Engine Oil Level
Check / Change Engine Air Filter *
Change Engine Oil & Filter *
Inspect Spark Plug(s) *
Check/Replace Fuel Filter *
• Refer to engine owner's manual. Change original engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
23
To Next Page