Need help?Do you have a question about the Snell Type A and is the answer not in the manual?
General| Type | Floorstanding |
|---|---|
| Configuration | 3-way |
| Woofer | 10-inch |
| Midrange | 5-inch |
| Impedance | 8 ohms |
| Power Handling | 200W |
| Driver Configuration | one woofer, one midrange, one tweeter |
| Tweeter | 1-inch dome |
| Enclosure Type | Bass reflex |
Describes typical speaker placement for optimal stereo imaging and tonal balance.
Details alternative placement strategies, like using opposite walls.
Discusses the importance of associated audio equipment and source material quality.
Addresses turntable placement to avoid feedback and its effects on sound.
Explains how to connect the speakers for standard operation.
Discusses the judicious use of tone controls and equalizers with the Type A speakers.
Details the purpose and replacement of fuses for speaker drivers.
Lists specific fuse types and ratings for different speaker drivers.
Discusses common audio system issues and troubleshooting steps for the speakers.
Provides instructions for maintaining the speaker's cabinet finish.
Explains the advantages of bi-amplification for improved sound quality.
Outlines the system configuration required for bi-amplification.
Details the necessary additional equipment and setup considerations for bi-amplification.
Guides on determining amplifier phase and setting crossover levels for proper bi-amplification.
To Next Page