Snom D815W - Page 6

V: 10/13/2024 - 1 ©2024 Snom Technology GmbH 6/22
Short User Manual
Call indicator (see → Getting started → Getting to know the D815W components → 6)
The bright-red LED situated on the top right corner of the phone indicates incoming, ongoing, held, and
missed calls. LED status indications:
SmartLabel keys (see → Getting started → Getting to know the D815W components → 7)
Depending on the function mapped onto the key, the red or green LEDs on the key will be activated when the
key event occurs. The LED of a line key will
Blinking rapidly when a call is coming in.
Glowing steadily when dialing, when in a call, and when you have missed a call. To turn the LED off after a
missed call, press the right arrow on the navigation key to view the Missed calls menu and
simultaneously turn off the LED.
Blinking slowly when you have put a call on hold.
10 SmartLabel keys (freely programmable function
keys with LEDs) on the both sides of the display
control the SmartLabels. They can be programmed
and labeled on the phone via menu-driven phone user
interface (PUI) and on the Function Keys page of the
phone's web user interface (WUI).
Each of the 10 physical keys can be assigned to
different functions on 4 SmartLabel pages, which
finally gives a total number of 40 SmartLabel keys.
You can switch between the
SmartLabel pages using the
following key:
Next page
Default setting:
Page 1: P1-P5 → Line, P6 → Key event: Do Not
Disturb (DND) mode, P7 → Key event: List
Missed Calls, P8 → Key event: Redial → List
dialled calls, P9 → Key event: Voicemail Info, P10
→ Key event: Next page
Page 2: P11-P19 → Line, P20 → Next page
Page 3: P21-P29 → Line, P30 → Next page
Page 4: P31-P39 → Line, P40 → Next page
blink rapidly when a call is ringing on the line
glow steadily when there is an ongoing call on the line
blink slowly when a call is on hold on the line
be off when the line is free.