Do you have a question about the Snom M700 and is the answer not in the manual?
Process to create a SIP Extension and assign it to a handset via the web interface.
Instructions for switching SIP extensions on various Snom DECT handset models.
Steps to create a SIP Extension and assign it to a handset using the M300 web interface.
Procedure to switch SIP extensions on Snom DECT handsets connected to the M300.
Guide to assigning extensions to handsets and setting default accounts on the M200.
Process to create a SIP Extension and assign it to a handset via the web interface.
Instructions for switching SIP extensions on various Snom DECT handset models.
Steps to create a SIP Extension and assign it to a handset using the M300 web interface.
Procedure to switch SIP extensions on Snom DECT handsets connected to the M300.
Guide to assigning extensions to handsets and setting default accounts on the M200.
| Number of base stations per installation | Up to 8 |
|---|---|
| Number of parallel calls | Up to 8 |
| Protocols | SIP |
| Type | DECT Base Station |
| DECT Standards | DECT, DECT 6.0 |
| Radio Coverage | Indoor: Up to 50 meters; Outdoor: Up to 300 meters |
| Power over Ethernet (PoE) | Yes |
| Security | TLS, SRTP |
| Compatibility | Snom M Series Handsets |
| Wireless Range | Up to 300 meters outdoors |
| Bluetooth Version | No |
Loading...