Snom M700 User Manual

Is it possible to assign more than one identity to a Snom
DECT Handset
Index:
On the M700 / M900
Create the SIP Extension and assign it to a handset
Switch SIP Extensions on the M25, M65, M70, M80, M85, M90 Handset
On the M300
Create the SIP Extension and assign it to a handset
Switch SIP Extensions on the M25, M65, M70, M80, M85, M90 Handset
On the M200
That depends on the base station model
On the M700 / M900
Create the SIP Extension and assign it to a handset
Login to the Web user interface and navigate to Extensions Add Extensions
On the “ ” screen you can create the SIP Extension and assign it to any of the available DECT registered handset IndexesAdd extension
Save the changes and verify the has been assigned to the chosen handsetSIP Extension M25, M65, M70, M80, M85, M90
In the above example you can see that we have assigned , and to Index#2SIP extensions 34052 34053 34054
Switch SIP Extensions on the M25, M65, M70, M80, M85, M90 Handset

Snom M700 Specifications

General

Number of base stations per installation	Up to 8
Number of parallel calls	Up to 8
Protocols	SIP
Type	DECT Base Station
DECT Standards	DECT, DECT 6.0
Radio Coverage	Indoor: Up to 50 meters; Outdoor: Up to 300 meters
Power over Ethernet (PoE)	Yes
Security	TLS, SRTP
Compatibility	Snom M Series Handsets
Wireless Range	Up to 300 meters outdoors
Bluetooth Version	No