Snom M9 - Creating and Uploading VCARDs

© 2011 snom technology AG
snom m9 Webinar (ST802)
Creating a VCARD with picture:

Select a Contact Card from “Contacts” or create a
new Contact under FileNewContact

Click on “Add Contact Picture” and upload the
picture of the contact in 40 × 50 Pixels JPEG
format

Click on “Save and Close” to save the contact

Right click on the contact and click on “Send as
Business Card”

Right click on the .vcf file and Copy Paste the file
on your computer
Picture Caller-ID
23