Need help?Do you have a question about the Snorkel S2632E and is the answer not in the manual?
General| Model | S2632E |
|---|---|
| Category | Lifting Systems |
| Weight | 4, 520 lb (2, 050 kg) |
| Power Source | Electric |
| Platform Capacity | 500 lbs |
| Overall Width | 0.81 m |
| Width | 0.81 m |
| Tire Type | Solid |
Defines safe distances from energized conductors to prevent electrocution.
Lists standard features, options, and explains the operator's manual.
Explains safety symbols, alerts, and emphasizes operator training and manual review.
Emphasizes training requirements and operator responsibilities for safe operation.
Details maintenance qualifications and cautions against unauthorized modifications.
Identifies key components of the aerial platform with diagrams.
Provides detailed technical specifications for the S1930E aerial platform.
Provides detailed technical specifications for the S1932E aerial platform.
Provides detailed technical specifications for the S2632E aerial platform.
Warns about electrocution risks and safe approach distances to conductors.
Stresses safety device compliance, workplace inspections, and safe practices.
Addresses tip-over prevention, falling hazards, and general safe operation guidelines.
Details safety for electrical systems, hydraulic fluid, and maintaining placards.
Details emergency stop controls, alarms, pothole, and level sensor interlocks.
Explains pothole protection systems and the use of the safety prop for maintenance.
Covers the level sensor interlock for chassis tilt and the guardrail system.
Describes the tilt alarm, horn, and optional flashing light for safety.
Describes the hour meter, battery charge indicators, and battery condition indicator.
Covers general battery maintenance, safety during charging, and charging procedures.
Details the battery disconnect and operation of lower controls for platform functions.
Explains upper control panel layout, joystick functions, and various control switches.
Covers drive range switch, horn button, and circuit breaker reset.
Guides inspection of manual, electrical system, and hydraulic system components.
Covers inspection of battery terminals, charger, and proper use of the safety prop.
Covers inspection of tires, wheels, ground strap, and testing lower control operations.
Tests emergency stop, lowering alarm, pothole interlock, and emergency lowering from lower controls.
Inspects structural components, slide blocks, and fasteners for damage or wear.
Covers inspection of guardrail system, platform extension, and upper controls.
Inspects fold down rails and tests operation of upper controls.
Tests upper controls emergency stop, horn, lowering alarm, drive alarm, power outlet, and flashing lights.
Guides inspection and cleaning of safety placards and decals.
Details preparation steps and operation using lower controls for platform movement.
Explains upper control operation, raising/lowering, extension, and gates.
Covers wallboard gate use and basic driving/steering procedures.
Discusses drive speed limits, level sensor interlock, and folding guardrails.
Explains access to components via swing-out trays and the electrical power outlet.
Details procedures for stowing the platform and various transport methods.
Provides correct procedures for lifting the aerial platform with a forklift.
Covers using a winch or driving the platform onto a transport vehicle.
Explains proper hoisting techniques and securing the platform for safe transport.
Explains procedures for emergency platform lowering and manually towing the machine.
Provides a chart of common symptoms, causes, and corrective actions for machine malfunctions.
Defines key terms used throughout the operator's manual for clarity.
Outlines the warranty coverage, exclusions, and customer responsibilities.
To Next Page
