Chapter 2 – Specifications
8 TB42/TB50 – 0075251EE
Engine Specifications
Note 1: Refer to the engine manufacturers manual for specific fuel recommendations and specifications.
Note 2: Ethylene glycol or Propylene glycol may be used. Refer to the Cummins
®
Operation and Maintenance Manual B3.3 Series
Engines for specific coolant recommendations and specifications.
Note 3: Refer to the engine manufacturers manual for specific lubricating oil recommendations and specifications.
Deutz
F3L-2011F
Diesel
2.0 liter (125 cu.
in.)
• DIN 51 601 (February 1986).
1
• BS 2869: A1 and A2 (with A2
refer to Deutz manual about
sulfur content)
1
• ASTM D 975-88: 1-D and 2-D
• CEN EN 590 or DIN EN 590
• NATO Code F-54 and F-75
• For operating temperatures
below 0°C (32°F) use winter
grade diesel.
Air
6.0 liter
(1.59 US gal)
API: CD
or higher
3
78°C to 95°C
172°F to 203°F
Displacement Fuel Grade Coolant
Operating
Temperature
Oil
Capacity
Oil
Grade
Engine
Cummins
B3.3
Diesel
3.26 liter
(199 cu. in.)
ASTM No. 2D fuel with a
minimum Cetane number of
40.
1
For operating tempera-
tures below 0°C (32°F) use
winterized No. 2D.
50% water
50% Antifreeze
2
7.5 liter (2 gal)
total
1.5 liter (1.6 qt)
Low to High
SAE
15W-40
3
API:
CH4/SG
60°C to 100°C
140°F to 212°F
To Next Page
