Chapter 6 – Controls
TB42/TB50 – 0075251EE 25
Driving and Platform Work Lights
The control for the optional driving lights is on the back of
each light. Place the switch in the on position to operate
the driving lights.
The control for the optional platform work lights is on the
back of each light (refer to Figure 6.7).
Figure 6.7 – Platform Work Lights
Machine/Generator Switch
The switch for the optional AC generator is located on the
front of the upper control panel.
With the engine running, place the switch in the genera-
tor position to provide electrical power to the electrical
outlet at the platform. Place the switch in the machine
position to turn off the generator and resume machine
operation.
Machine functions will not operate while the switch is in
the generator position.
To Next Page
